Printing is on a "silver coloured" tinplate using the OFFSET printing method.
The printing layout for ring pull caps and crown caps are available by clicking the links below.
RingCrown ring pull cap printing layout
crown cork printing layout
ORIGINAL MATERIAL FOR PRINING RING PULL CAPS & CROWN CAPS:FreeHand MX, illustrator CS3, InDesing CS3, CorelDraw 11, Photoshop CS3 and / or Acrobat PDF-format, vector graphic
CD-rom or email
Artwork can be sent by email to:
grafi@finn-korkki.com
For printing we need to know the Pantone PMS -colour numbers. The 4-colour system CMYK is also possible.
For a 4-colour picture we need a tiff file format.
The resolution needed is 60 lines/cm (= 150 lines/inch)
The colours can be printed either as an opaque ink (paper) or as a transparent ink (metalic / grain of metal visible).
Let us know which way of printing you choose.
Click RingCrown ring pull cap to see an enlarged photo.
TEXT ON THE SKIRT OF A CAP
A text, not higher than 2 mm, may be stationed around the cap skirt. Click RingCrown ring pull caps to see an enlarged picture.
INSIDE PRINTING
We also manufacture Ring Crowns and crown corks with inside printings. If you have any questions please don't hesitate to contact us.
Click Ring pull cap inside printing for an enlarged photo.
Inside printing layout
